XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
camber link shims https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=101&t=18493 |
Page 1 of 1 |
Author: | coastal [ Tue Dec 31, 2013 12:48:11 ] |
Post subject: | camber link shims |
looking at the setup sheets when it says 3mm shim under the outer camber link is that the kit 1mm shim plus the 2mm cone shim or is it a 3mm shim plus the cone spacer? |
Author: | auto2 [ Tue Dec 31, 2013 17:34:12 ] |
Post subject: | Re: camber link shims |
well you need the cone spacer so it doesnt bind so my guess is that doesnt count as measuring the spacers. |
Author: | coastal [ Tue Dec 31, 2013 17:36:01 ] |
Post subject: | Re: camber link shims |
Author: | JoMei [ Thu Jan 02, 2014 13:50:47 ] |
Post subject: | Re: camber link shims |
Hello, the conical shim provides the basic (minimum) 2mm, additionaly comes a 1mm shim - resulting in 3mm total spacing. regards |
Author: | coastal [ Thu Jan 02, 2014 21:19:22 ] |
Post subject: | Re: camber link shims |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |