XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Xray spring rates https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=101&t=13202 |
Page 1 of 1 |
Author: | OneKiwi [ Sun Dec 23, 2012 18:36:16 ] |
Post subject: | Xray spring rates |
Does anyone have a list of the spring rates? |
Author: | Rune [ Mon Dec 24, 2012 00:40:22 ] |
Post subject: | Re: Xray spring rates |
This one? Skjermbilde 2012-12-23 kl. 23.37.43.png [ 189.3 KiB | Viewed 9346 times ] |
Author: | OneKiwi [ Mon Dec 24, 2012 10:15:34 ] |
Post subject: | Re: Xray spring rates |
Im after lbs/inch or something so I can compare them to other springs |
Author: | Rune [ Mon Dec 24, 2012 11:49:49 ] |
Post subject: | Re: Xray spring rates |
Yeah, I figured that.... but after I have posted ![]() I use the 2 stripe progressive on a indoor clay track, and they are so much better than the stock ones, but it´s difficult to compare them with other brands as they are progressive |
Author: | OneKiwi [ Mon Dec 24, 2012 12:27:32 ] |
Post subject: | Re: Xray spring rates |
Your running at Moss indoors right, happy they redid that 1 big jump.. I presume they get harder left to right in the picture. Could you try and compare them to TD ones if you get a chance. |
Author: | ps71 [ Mon Dec 24, 2012 15:55:00 ] |
Post subject: | Re: Xray spring rates |
Author: | OneKiwi [ Tue Jan 15, 2013 10:24:58 ] |
Post subject: | Re: Xray spring rates |
That really doesn't say anything, I want a comparison to other brands |
Author: | j0pp3 [ Tue Jan 15, 2013 13:45:20 ] |
Post subject: | Re: Xray spring rates |
Author: | j0pp3 [ Tue Jan 15, 2013 13:52:41 ] |
Post subject: | Re: Xray spring rates |
If it's true (someone else have to double check) then a conversion should be like this: Front Linear 1dot C=0.65 or 3.71lbs/inch Linear 2 dot C=0.72 or 4.11lbs/inch Progressive 2 stripes C=0.65-0.85 or 3.71-4.85lbs/inch Rear Linear 1dot C=0,35 or 1.99lbs/inch Linear 2dot C=0,40 or 2.28lbs/inch Linear 3dot C=0,45 or 2.57lbs/inch Progressive 2 stripes C=0,35-0,45 or 1.99-2.57lbs/inch Cheers |
Author: | brano [ Wed Jan 16, 2013 07:18:15 ] |
Post subject: | Re: Xray spring rates |
Author: | jackeltrader [ Thu Jan 17, 2013 10:42:13 ] |
Post subject: | Re: Xray spring rates |
Author: | mark [ Sun Jan 20, 2013 17:25:31 ] |
Post subject: | Re: Xray spring rates |
so if you run the progressive springs,you only need one set for all tracks? |
Author: | HeavyD [ Thu Sep 05, 2013 01:32:16 ] |
Post subject: | Re: Xray spring rates |
Update - that conversion factor might just be right-on! |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |